name: audio-production
description: Professional audio production for music, podcasts, and sound design. Use when working with audio recording, mixing, mastering, or sound design for any medium.
Audio Production
Comprehensive guide for professional audio production across music, podcasts, video, and interactive media.
Target Peaks: -12 to -6 dBFS
Average Level: -18 to -12 dBFS
Why?
- Leaves headroom for processing
- Matches analog equipment sweet spot
- Prevents digital clipping
- 24-bit has plenty of resolution
Recording Best Practices
Set gain before recording (never during)
Record at 24-bit minimum
Use 48kHz for video, 44.1kHz for music
Monitor with headphones
Record a few seconds of room tone
Check phase when using multiple mics
Label takes immediately
Essential Processing
EQ (Equalization)
Types:
- High-pass filter (HPF): Removes low frequencies
- Low-pass filter (LPF): Removes high frequencies
- Bell/Peak: Boost or cut specific frequency
- Shelf: Boost or cut above/below frequency
Common Applications:
┌─────────────────────────────────────────┐
│ Vocal: │
│ HPF at 80-100Hz (remove rumble) │
│ Cut 200-300Hz (reduce mud) │
│ Boost 3-5kHz (presence) │
│ Shelf boost 10kHz+ (air) │
├─────────────────────────────────────────┤
│ Kick Drum: │
│ Boost 50-80Hz (sub) │
│ Cut 300-400Hz (boxiness) │
│ Boost 3-5kHz (attack/click) │
├─────────────────────────────────────────┤
│ Electric Guitar: │
│ HPF at 80Hz │
│ Cut 400-600Hz if muddy │
│ Boost 2-4kHz (bite) │
└─────────────────────────────────────────┘
Compression
Parameters:
┌────────────────────────────────────────────────┐
│ Threshold: Level where compression starts │
│ Ratio: Amount of compression (4:1, 8:1, etc.) │
│ Attack: Time to engage (fast=punch, slow=body)│
│ Release: Time to disengage │
│ Knee: Hard (sudden) or soft (gradual) │
│ Makeup Gain: Restore lost volume │
└────────────────────────────────────────────────┘
Common Settings:
┌─────────────────────────────────────────┐
│ Vocals: 3:1-4:1, medium attack/release │
│ Drums: 4:1-8:1, fast attack │
│ Bass: 4:1, medium attack │
│ Mix Bus: 2:1-3:1, slow attack, 1-3dB GR│
└─────────────────────────────────────────┘
Reverb
Type
Character
Use
Room
Small, tight
Natural ambience
Hall
Large, spacious
Orchestral, ballads
Plate
Bright, smooth
Vocals, snare
Spring
Vintage, boingy
Guitar, lo-fi
Chamber
Warm, dense
Natural depth
Key Parameters:
- Pre-delay: Time before reverb (50-100ms for vocals)
- Decay/RT60: How long it lasts
- Damping: High-frequency absorption
- Size: Room dimensions
- Mix/Wet-Dry: Balance with original
Stereo Field:
Hard L L L-C CENTER R-C R Hard R
│ │ │ │ │ │ │
│ │ │ │ │ │ │
Rhythm Gtr1 Keys1 Vocal Keys2 Gtr2 Rhythm
Gtr BVox1 Bass BVox2 Gtr
Kick
Snare
Common Positions:
- Center (0): Lead vocal, bass, kick, snare
- Slight L/R: Main instruments, harmonies
- Wide L/R: Rhythm guitars, stereo keys
- Hard L/R: Doubled parts, effects
Frequency Balancing
Making space (subtractive EQ approach):
┌────────────────────────────────────────────┐
│ Kick: Boost 60Hz │ Cut from Bass here │
│ Bass: Boost 80-100 │ Cut from Kick here │
│ Gtr: Owns 1-3kHz │ Cut vocal slightly │
│ Vocal: Boost 3-5kHz │ Cut guitar slightly │
└────────────────────────────────────────────┘
Each element should have its own frequency "home"
Mix Bus Processing
Typical Chain:
1. Subtle EQ (tonal shaping)
2. Light compression (2:1, 1-3dB GR)
3. Stereo enhancement (if needed)
4. Limiter (only for reference bounce)
Keep mix bus processing minimal!
Leave headroom for mastering.
Mastering
Mastering Goals
Tonal Balance: Even frequency response
Dynamics: Appropriate loudness/dynamics
Stereo Image: Width and mono compatibility
Translation: Sounds good everywhere
Format: Prepare for distribution
Loudness Standards
Platform
Target
Measurement
Spotify
-14 LUFS
Integrated
Apple Music
-16 LUFS
Integrated
YouTube
-14 LUFS
Integrated
Broadcast (US)
-24 LUFS
Integrated
Broadcast (EU)
-23 LUFS
Integrated
CD
-9 to -12 LUFS
Integrated
Mastering Chain (Typical)
1. Reference Import
└─→ Compare to commercial releases
2. EQ (Linear Phase)
└─→ Broad adjustments only
3. Multiband Compression
└─→ Control specific bands
4. Stereo Width
└─→ Enhance or narrow
5. Limiting
└─→ Final loudness, prevent clipping
6. Dither (if needed)
└─→ 16-bit conversion only
Podcast Production
Recording Setup
Recommended Signal Chain:
Mic → Audio Interface → DAW
Equipment Tiers:
┌─────────────────────────────────────────┐
│ Budget: USB Mic (Blue Yeti, AT2020) │
│ Mid: SM7B + Cloudlifter + Interface│
│ Pro: Large diaphragm condenser │
│ + high-end preamp │
└─────────────────────────────────────────┘